Item Description
Product Description:
one.Flexspline is a hollow flanging common cylinder structure.
2.There is a huge-diameter hollow shaft hole in the center of the cam of the wave generator. The interior layout of the reducer has a help bearing.
three.It has a fully sealed composition and is easy to put in. It is very appropriate for the situations exactly where the wire wants to be threaded from the centre of the reducer.
Advantages:
The 1st:Substantial precision,substantial torque
The second:dedicated technical staff can be on-the-go to give design answers
The third:Factory direct revenue fantastic workmanship sturdy quality assurance
The fourth:Solution top quality problems have a one-yr guarantee time, can be returned for CZPT or fix
Company profile:
HangZhou CZPT Technological innovation Co., Ltd. proven in 2014, is fully commited to the R & D plant of large-precision transmission factors. At existing, the once-a-year production capability can attain 45000 sets of harmonic reducers. We firmly believe in high quality very first. All hyperlinks from uncooked components to finished goods are strictly supervised and controlled, which provides a sound basis for solution quality. Our items are offered all above the country and overseas.
The harmonic reducer and other higher-precision transmission parts were independently developed by the company. Our firm spends twenty% of its revenue every yr on the investigation and development of new technologies in the market. There are 5 individuals in R & D.
Our benefit is as underneath:
one.7 several years of advertising and marketing expertise
two. 5-particular person R & D staff to supply you with technological assistance
three. It is marketed at house and overseas and exported to Turkey and Ireland
4. The solution good quality is guaranteed with a a single-calendar year warranty
five. Products can be customized
Toughness factory:
Our plant has an entire campus The quantity of workshops is close to 300 Whether it is from the production of uncooked components and the procurement of raw materials to the inspection of completed products, we are undertaking it ourselves. There is a complete production system
HST-III Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start off end | The allowable greatest of the common load torque | Maximum torque is authorized in an immediate | Let the optimum speed to be entered | Typical enter pace is authorized | Back hole | style lifestyle | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | fifty | 6.two | .six | 20.seven | 2.one | 7.9 | .7 | forty.3 | four.1 | 7000 | 3000 | ≤30 | 10000 |
| 80 | 9 | .nine | 27 | two.7 | 12.seven | one.3 | 54.one | 5.5 | |||||
| a hundred | 9 | .nine | 32 | three.3 | twelve.7 | 1.three | sixty two.one | six.3 | |||||
| 17 | fifty | 18.four | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | eight.2 | 6500 | 3000 | ≤30 | 15000 |
| 80 | 25.three | 2.six | forty nine.five | 5 | 31 | 3.2 | a hundred.1 | 10.two | |||||
| one hundred | 27.six | two.8 | 62 | six.three | 45 | 4.6 | 124.two | 12.seven | |||||
| 20 | 50 | 28.8 | 2.nine | 64.four | 6.six | 39 | 4 | 112.7 | eleven.five | 5600 | 3000 | ≤30 | 15000 |
| eighty | 39.1 | four | eighty five | eight.8 | 54 | 5.five | 146.1 | 14.9 | |||||
| one hundred | 46 | four.7 | 94.3 | 9.6 | 56 | 5.eight | 169.one | seventeen.two | |||||
| a hundred and twenty | 46 | four.7 | one hundred | 10.two | 56 | five.eight | 169.one | seventeen.2 | |||||
| 160 | forty six | 4.seven | 100 | 10.2 | fifty six | five.eight | 169.one | 17.2 | |||||
| 25 | 50 | 44.nine | four.6 | 113 | 11.five | sixty three | 6.five | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
| eighty | seventy two.5 | seven.four | 158 | sixteen.one | a hundred | 10.2 | 293.three | 29.9 | |||||
| one hundred | seventy seven.one | 7.nine | 181 | 18.4 | 124 | twelve.seven | 326.six | 33.3 | |||||
| one hundred twenty | 77.1 | 7.9 | 192 | 19.six | 124 | twelve.7 | 349.6 | 35.six | |||||
| 32 | 50 | 87.four | 8.nine | 248 | twenty five.three | 124 | 12.7 | 439 | forty four.8 | 4000 | 3000 | ≤30 | 15000 |
| eighty | a hundred thirty five.7 | 13.eight | 350 | 35.six | 192 | 19.6 | 653 | sixty six.6 | |||||
| a hundred | 157.six | 16.1 | 383 | 39.1 | 248 | twenty five.three | 744 | seventy five.nine | |||||
| 40 | a hundred | 308 | 37.2 | 660 | sixty seven | 432 | forty four | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at begin stop | The allowable maximum of the common load torque | Maximum torque is allowed in an instant | Enable the highest speed to be entered | Common enter pace is permitted | Again hole | design existence | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | fifty | 7 | .7 | 23 | two.three | nine | .9 | 46 | four.seven | 14000 | 8500 | ≤20 | 15000 |
| 80 | 10 | one | thirty | three.1 | 14 | one.4 | 61 | 6.2 | |||||
| one hundred | ten | one | 36 | 3.seven | fourteen | 1.4 | 70 | seven.two | |||||
| 17 | fifty | 21 | two.one | forty four | 4.five | 34 | 3.four | 91 | nine | 10000 | 7300 | ≤20 | 20000 |
| eighty | 29 | 2.9 | fifty six | five.seven | 35 | 3.6 | 113 | 12 | |||||
| one hundred | 31 | 3.two | 70 | 7.two | 51 | five.two | 143 | 15 | |||||
| 20 | 50 | 33 | three.3 | 73 | seven.4 | 44 | four.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
| 80 | 44 | 4.five | 96 | nine.8 | sixty one | six.2 | 165 | 17 | |||||
| a hundred | 52 | 5.3 | 107 | 10.nine | sixty four | six.5 | 191 | 20 | |||||
| 120 | 52 | five.three | 113 | eleven.5 | 64 | 6.5 | 191 | twenty | |||||
| 160 | fifty two | 5.three | a hundred and twenty | 12.two | sixty four | 6.five | 191 | twenty | |||||
| 25 | 50 | fifty one | five.2 | 127 | 13 | 72 | seven.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
| 80 | eighty two | eight.four | 178 | 18 | 113 | 12 | 332 | 34 | |||||
| one hundred | 87 | eight.nine | 204 | 21 | one hundred forty | 14 | 369 | 38 | |||||
| a hundred and twenty | 87 | eight.nine | 217 | 22 | a hundred and forty | 14 | 395 | forty | |||||
| 32 | fifty | 99 | ten | 281 | 29 | one hundred forty | 14 | 497 | fifty one | 7000 | 4800 | ≤20 | 20000 |
| 80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
| 100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
| 40 | a hundred | 345 | 35 | 738 | seventy five | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Software scenario:
FQA:
Q: What need to I give when I decide on gearbox/velocity reducer?
A: The very best way is to give the motor drawing with parameter. Our engineer will check and advocate the most suitable gearbox model for your refer.
Or you can also provide beneath specification as effectively:
one) Variety, design and torque.
2) Ratio or output pace
three) Working issue and relationship technique
four) Quality and mounted equipment identify
5) Input method and enter pace
six) Motor model design or flange and motor shaft size
Below is a list of our at present accessible industrial gearboxes. If you can't discover what you are looking for, remember to make contact with the factory for more choices. At EP, we are consistently developing new items and retrofitting aged kinds to fulfill buyer demands.
Gearboxes go by many different names, including equipment drives, velocity reducers, gear reducers, speed reducers, and gear motors. All conditions are utilised interchangeably when referring to inline equipment reducers. Our inventory contains a vast selection of equipment reducers for high pace, high precision programs with input speeds up to 4000 RPM.
